Skip to content

1:6 scale or 1:7.3333333333333 scale grocery store

1:6 scale or 1:7.3333333333333 scale grocery store published on No Comments on 1:6 scale or 1:7.3333333333333 scale grocery store

I’ve always wanted a small-scale grocery store. However, the sheer volume of food available that I would have to make has always daunted me. Recently I decided to use my time-honored method of using a part to suggest the whole, but with the principle applied to a grocery store. I chose a produce section to make because variety of shapes and colors would be aesthetically pleasing. Plus fruit is much easier to make than endless permutations of, say, cereal boxes. Results below. Continue reading 1:6 scale or 1:7.3333333333333 scale grocery store

1:7.3 scale kitchen — Crescent cast iron stove and Rement kitchen

1:7.3 scale kitchen — Crescent cast iron stove and Rement kitchen published on 1 Comment on 1:7.3 scale kitchen — Crescent cast iron stove and Rement kitchen

1:7.3 scale Bill and 1:7.3 scale Missy pose with two recent acquisitions, a Crescent cast iron toy stove and a Rement kitchen, to show scale.  Half in the frame of the first pic is another project in progress: a small-scale produce section for when I want my characters to go to a grocery store.Continue reading 1:7.3 scale kitchen — Crescent cast iron stove and Rement kitchen

Scratch that — they’re NOT 1:9 scale! They’re 1:7.333333 scale!

Scratch that — they’re NOT 1:9 scale! They’re 1:7.333333 scale! published on No Comments on Scratch that — they’re NOT 1:9 scale! They’re 1:7.333333 scale!

The 9″ DW dolls previously referred to as 1:9 scale are actually larger than that. They’re 1:7.333333333 scale. Fine…I’m changing the tag…

Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill! published on No Comments on Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

I got a Barbie skirt in the mail recently for Missy, shortened it an inch, and it fit perfectly. I made a raggedy bow out of some gauzy purplish stretch net, and I was done. Then she posed against a selection of Halloween/Gothic art papers I got from Michaels recently.

I just finished 1:9 scale versions of Bill and Missy today. Both of them are hybrids, combining heads from the 3″ Titan mini figures with bodies from ToyBiz’s Famous Covers series of Marvel action figures. They’re 9″ high.

For Bill, I painted her body to match her head, filled in her irises, dry-brushed her hair to show up the detail, glossed lips and eyes, ground the neck off the head, and modded the crotch and tops of forearms for greater flexion. She wears a dress from a Mattel Skipper Babysitters Inc. doll, a bolero from a Fresh Dolls Mia, leggings from a Mattel Made to Move Fashionista Barbie, a Rement sunflower, and bracelets made from a bubble tea straw.

For Missy, I removed her original hair and replaced it with a combination of a hand-sculpted scalp [with Aves Apoxie Sculpt] and a ponytail of Mattel Barbie hair, which I curled with a boil perm. I swapped out the default ToyBiz Famous Covers hands for those from a 10″ Disney Elite Princess Leia figure. I filled in her irises, repainted eyebrows, gave a very light brown wash to the nasolabial creases, and repainted eyebrows. I also carved out top of forearms and inner sides of crotch to increase poseability. Missy wears a shirt from an unknown female action figure, a Mattel Barbie skirt [shortened by 1″], leggings from a Mattel Made to Move Fashionista Barbie [not shown], and a cravat that I made. Her umbrella is a large cocktail umbrella painted black with acrylic paints and sealed.

Coming eventually in the 1:9 scale world: Alison Cheney [Scream of the Shalka], Shalka Doctor, Delgado Master [=Shalka Master in my mind], and the Third Doctor!

 

 

 

 

Continue reading Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

1:9 scale Missy done except for clothes!

1:9 scale Missy done except for clothes! published on No Comments on 1:9 scale Missy done except for clothes!

I finalized 1:9 scale Missy’s hair and faceup over the past few days. More detailed pics later, including shots with 1:9 scale Bill, when it’s not so late.Continue reading 1:9 scale Missy done except for clothes!

1:9 scale Missy gets improved hair

1:9 scale Missy gets improved hair published on No Comments on 1:9 scale Missy gets improved hair

I originally planned to make Shalka Doctor next in 1:9 scale, but I just felt so sorry for Missy with her shitty hair that I turned my attention to her next. Continue reading 1:9 scale Missy gets improved hair

Other projects II: Weeping Angel and 1:9 scale Alison

Other projects II: Weeping Angel and 1:9 scale Alison published on No Comments on Other projects II: Weeping Angel and 1:9 scale Alison

My interest in cemeteries, funerary statues, and Doctor Who converges in the Weeping Angels. Since I stare at Carnelian’s cemetery/magic set every time I’m at my computer, I started thinking that it needed more 1:6 scale statues. Sure, I have an Angel of Grief, but she’s more like 1:9 scale. I also have a meditating skeleton, but I was thinking of something that could actually work as a realistic cemetery denizen [assuming that you don’t look at its FANGS]. Therefore I thought that I should make a Weeping Angel.

BCS made 1:6 scale Weeping Angels, but they stink for a few reasons. 1) They’re not articulated figures. They’re big resin door stops with swappable heads and arms. 2) They’re expensive. I wanted an affordable interpretation with more poseability. For mine, I decided to mount the upper half of an action figure on a solid base [i.e., the floor-length skirt]. The solid base would provide enough of a statuesque look, but she could still menace people with her upper body articulation.

For maximum effectiveness, I wanted a yelling or snarling headsculpt for my Angel. I had very little luck, as most open-mouthed sculpts for female action figures look relaxed or seductive at best and blank at worst. TB League made a 1:6 scale version of comic book hero Shi, however, with an angry expression. With her crinkled nose, lowered brow, and individually sculpted teeth, she’ll serve quite nicely, even if she is fangless. You can see her below at left. I’m going to remove her hair and current paint, then sculpt her chignon, make her chiton out of some sort of semi-stiffened fabric, then paint the whole thing with spray paint that has a stone effect. Continue reading Other projects II: Weeping Angel and 1:9 scale Alison

Bill, Alison’s Heliantha clarissima

Bill, Alison’s Heliantha clarissima published on No Comments on Bill, Alison’s Heliantha clarissima

1:9 scale Bill improved exponentially this morning when I cut the stem off a Rement plastic sunflower and put it in her hair! The Master, who never calls people by their given names, refers to Bill as Heliantha clarissima, or most brilliant sunflower. And now she truly is a Heliantha, waiting for her Alisonshine!

Continue reading Bill, Alison’s Heliantha clarissima

1:9 scale Bill is done!

1:9 scale Bill is done! published on No Comments on 1:9 scale Bill is done!

Here she is! I made her some bracelets out of a bubble tea straw. I enhanced her faceup just a bit by darkening the line of her upper eyelashes and filling her irises and pupils with brown to make her look more innocent and friendly. Continue reading 1:9 scale Bill is done!

Enhancing 1:9 scale Bill’s existing features

Enhancing 1:9 scale Bill’s existing features published on 1 Comment on Enhancing 1:9 scale Bill’s existing features

Since I last took a picture of 1:9 scale Bill, I performed several minor mods. The tendons on her right hand stood out prominently, so I filled in the back of her hand with some Aves Apoxie Sculpt and painted it to match. Fortunately, Craft Smart Golden Brown acrylic paint allowed me to match her hands to her head [and other painted parts of her body] without mixing. I sealed her hands with matte varnish.

I then turned my attention to her hair. When I ground down her jaw, I also chipped paint off the bottom of her hair. Therefore I started with a layer of blackish brown to cover all of her hair. Then I dry brushed a layer of Folk Art 940 Coffee Bean acrylic paint over her hair. This gave the impression of light touching the ends. It also brought out all the detail in the sculpt, which had formerly been obscured by the flat black paint.

For my final work, I’m going to enhance her faceup. She needs eyeliner, bags under eyes, more defined smirk brackets, and some eyebrow texturing. Probably some lip texturing too. The basics are there; they just need a little help. I’m really appreciating the Titans vinyl figures. Many of them [not all, but most] combine a recognizable likeness with a great caricature. The simple, but accurate, details of the sculpts are lost beneath indifferent paint jobs.

This 1:9 scale Bill doll has started me on a scale that I never thought I’d get into. But now I have embraced it with enthusiasm. As I mentioned before, I have a Titan First Doctor that I will make into Shalka Doctor, and I’m getting a little Delgado Master next month. I have also prepared my digital version of Alison for printing in 1:9 scale so I can make her, thus completing the Dork fam.

I’ve also ordered a Third Doctor, just because a Delgado Master needs a Third Doctor, and a Missy. I was planning to do Three and Missy in 1:6 scale just like everyone else [i.e., my main dolls], but the 1:9 scale sculpts were too good to pass up. I think I’ll do 1:9 scale Three and Missy. Not sure about a 1:9 scale Ten, though. The sculpts for Ten are great, but a 1:9 scale Ten would need a 1:9 scale Harry, and the Titans of Simm Master are just ugly.

Continue reading Enhancing 1:9 scale Bill’s existing features

Closing the thigh gap on a Toybiz 8″ Famous Covers Storm body for 1:9 scale Bill

Closing the thigh gap on a Toybiz 8″ Famous Covers Storm body for 1:9 scale Bill published on 1 Comment on Closing the thigh gap on a Toybiz 8″ Famous Covers Storm body for 1:9 scale Bill

My 1:9 scale Bill had a thigh gap that was bugging me. People tend to sit with their thighs side by side, but the first picture below illustrates that the Toybiz 8″ Famous Covers Storm body could not put its thighs together. Continue reading Closing the thigh gap on a Toybiz 8″ Famous Covers Storm body for 1:9 scale Bill

1:9 scale Bill Potts is TOO CUTE!!!

1:9 scale Bill Potts is TOO CUTE!!! published on No Comments on 1:9 scale Bill Potts is TOO CUTE!!!

1:9 scale Bill is wearing a Mattel Babysitters Inc. AA Skipper jumper, Mattel Made to Move Barbie leggings, and a Fresh Dolls Mia bolero. She needs a sunflower for her hair, some decorations for her boots, and some jewelry. But she’s definitely rockin’ the look. <3 <3Continue reading 1:9 scale Bill Potts is TOO CUTE!!!

Adventures in 1:9 scale, or, I blame Bill Potts!

Adventures in 1:9 scale, or, I blame Bill Potts! published on No Comments on Adventures in 1:9 scale, or, I blame Bill Potts!

The three best companions ever in the history of Doctor Who are tied for first place: Alison Cheney, Bill Potts, and the Master. Alison and Bill suffered truly shitty adventures, so I paired them off, and now they are living happily.

Anyway, I’m always looking for little 3D representations of Bill, so I was checked online to see if Character Options had made her yet. No, of course not. But I did discover a Titan vinyl figure of her with a wonderful caricature that captures the essence of her lively, curious, upbeat personality. It also looks amazingly like Pearl Mackie, so of course I had to get it.

 

Further research into the DW offerings from Titan revealed more of my favorite characters, including the Third Doctor, the Tenth Doctor, and [coming in September!!!!!!!!!!!!!!!] Delgado Master. I began to consider the possibility of dolls in this scale, especially since there were headsculpts for two of my core fanfic characters, Bill and the Master.

But what about Alison and the Doctor? I decided I could get a decent Shalka Doctor out of the First Doctor Titan. Then I discovered Toy Biz Famous Cover 9″ action figures of superheroes. One of them, Storm, looked in the pictures like she might approximate Alison’s sharp features, so I ordered her.

Well, Storm’s head turned out to be small, asymmetrical, and un-charming, so that was a bust. However, Titan Bill’s head looks great, accounting, of course, for eventual skintone matching.

This was not enough to console me, however, because I was still pissed off my by lack of Alison. Then I realized that I’m a digital sculptor with access to a 3D printer, and I have also made a digital Alison. I can just print her out at the correct size. With 1:9 scale versions of all four members of the Dork fam in the offing, I was finally pleased. Pics below. Continue reading Adventures in 1:9 scale, or, I blame Bill Potts!

Primary Sidebar