Skip to content

Thirteen and the TARDIS

Thirteen and the TARDIS published on No Comments on Thirteen and the TARDIS

Character Options came out with a 10″ Thirteenth Doctor. After seeing how gay and dorky @natalunasans’ looked, I decided to get my own. I knew that, if I hesitated, the Doctor would probably increase in price on the secondary market, as the 1:6 scale Tenth Doctor and Martha Jones dolls have, and I’d be shit out of luck.

The Thirteen doll bears a very recognizable likeness to the actor Jodie Whittaker. The expression is neutral, tending slightly to the befuddled and definitely dweeby. I like it! Molded hair, tucked behind one ear on one side and partly obscuring the face on the other, is simply, but effectively sculpted. Body is sculpted more for function than form, but it’s all generally in scale. Right hand is sculpted to hold included sonic screwdriver, while left is in an open, neutral position.

The fabric outfit replicates the character’s dress with a few concessions to ease of use. Thirteen wears a long-sleeve white undershirt and a black T-shirt with rainbow stripes over that. These two pieces have been combined by Character Options into one piece, over which is a partly lined blue-grey trench with rainbow lapel trim, functional lined hood, and nonfunctional pockets. The high-waisted blue culottes Velcro in the front and have separate thin yellow ribbons for suspenders. There are molded brown boots with molded socks.

Paint is very simple on the face, with long dark eyebrows, unadorned eyes, and lips in a neutral orangey shade. I haven’t been paying attention to promo pics, but I’m pretty sure the character wears at least some more eyeliner. The character’s hairstyle with brown roots showing is approximated with a pale yellow layer over a brown plastic base. The yellow is too striking; I’ll have to work on this.

In terms of articulation, the doll has a single sculpt for both head and neck, with a ball joint at the base of the neck. Swiveling is good, though the neck socket on mine doesn’t quite accommodate the neck on sideways turns, so the front and back bust pieces separate slightly. There’s a bit of nodding movement, but not much. There are ball-jointed hips and shoulders, double-jointed elbows and knees, swivel waist, and wrists with both hinge and swivel joints. Doll can touch head and face [for extra puzzled/dweeby poses! :D], sit competently, and stand unsupported. However, because the feet are somewhat small, with only ankle swivels, balance is compromised.

Unfortunately, the Thirteen doll is not 1:6 scale. At 10″, it’s 4′ in 1:6 scale. If the doll were going to be truly in scale, it would be slightly more than 11.5″, as the actor Jodie Whittaker is slightly over 5.5′.

This doll will run people in the U.S. between $30.00 and $40.00, depending on where you pick it up. It’s built for play, but the price is kinda steep for kids. Older fans of Doctor Who, however, won’t blink at the price and will take a highly articulated, realistic, well tailored Thirteen that actually looks like the character and go wild. I enthusiastically endorse this doll, with the caveat that it will not play nicely scale-wise with anyone else.

Would it have killed you to make Thirteen in 1:6 scale, Character Options?

Anyway…

Here the Doctor steps out of the TARDIS and detects something odd about relative sizes… TARDIS played by a truly 1:6 scale BCS Tenth Doctor’s TARDIS. Thirteen played by aforementioned NOT-1:6-SCALE Character Options Thirteen doll. Continue reading Thirteen and the TARDIS

Dandelion Biking with Alison, the Master, and a TARDIS cat

Dandelion Biking with Alison, the Master, and a TARDIS cat published on No Comments on Dandelion Biking with Alison, the Master, and a TARDIS cat

Wow, I totally forgot that I had done this photostory with Alison and the Master almost 5 months ago! Here it is, another experiment in wordless storytelling. Continue reading Dandelion Biking with Alison, the Master, and a TARDIS cat

Little Shalka Dorks in Introducing Pippi Part VIII

Little Shalka Dorks in Introducing Pippi Part VIII published on 1 Comment on Little Shalka Dorks in Introducing Pippi Part VIII

Part VIII: Friends Make Everything Better. Continue reading Little Shalka Dorks in Introducing Pippi Part VIII

Fattening the Little Witch

Fattening the Little Witch published on No Comments on Fattening the Little Witch

I moved the Little Witch’s head to a more articulated body of better weight, but I needed to do one final thing before she was complete. I needed to bulk up her torso to make her little fats. Continue reading Fattening the Little Witch

Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill! published on No Comments on Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

I got a Barbie skirt in the mail recently for Missy, shortened it an inch, and it fit perfectly. I made a raggedy bow out of some gauzy purplish stretch net, and I was done. Then she posed against a selection of Halloween/Gothic art papers I got from Michaels recently.

I just finished 1:9 scale versions of Bill and Missy today. Both of them are hybrids, combining heads from the 3″ Titan mini figures with bodies from ToyBiz’s Famous Covers series of Marvel action figures. They’re 9″ high.

For Bill, I painted her body to match her head, filled in her irises, dry-brushed her hair to show up the detail, glossed lips and eyes, ground the neck off the head, and modded the crotch and tops of forearms for greater flexion. She wears a dress from a Mattel Skipper Babysitters Inc. doll, a bolero from a Fresh Dolls Mia, leggings from a Mattel Made to Move Fashionista Barbie, a Rement sunflower, and bracelets made from a bubble tea straw.

For Missy, I removed her original hair and replaced it with a combination of a hand-sculpted scalp [with Aves Apoxie Sculpt] and a ponytail of Mattel Barbie hair, which I curled with a boil perm. I swapped out the default ToyBiz Famous Covers hands for those from a 10″ Disney Elite Princess Leia figure. I filled in her irises, repainted eyebrows, gave a very light brown wash to the nasolabial creases, and repainted eyebrows. I also carved out top of forearms and inner sides of crotch to increase poseability. Missy wears a shirt from an unknown female action figure, a Mattel Barbie skirt [shortened by 1″], leggings from a Mattel Made to Move Fashionista Barbie [not shown], and a cravat that I made. Her umbrella is a large cocktail umbrella painted black with acrylic paints and sealed.

Coming eventually in the 1:9 scale world: Alison Cheney [Scream of the Shalka], Shalka Doctor, Delgado Master [=Shalka Master in my mind], and the Third Doctor!

 

 

 

 

Continue reading Glam photoshoot for 1:9 scale Missy [who’s done!] and Bill!

Improving the Little Witch’s body and likeness

Improving the Little Witch’s body and likeness published on No Comments on Improving the Little Witch’s body and likeness

After I upgraded the Little Fixit to a 21cm Obitsu body, I felt the need to work on the Little Witch too. I’ve been playing with these dolls more than I expected, and their limited poseability was bothering me. Continue reading Improving the Little Witch’s body and likeness

Honorine’s body upgrade

Honorine’s body upgrade published on No Comments on Honorine’s body upgrade

I recently purchased an 11cm Obitsu body with the thought that I would articulate one of my 1:6 scale younger kids. Well, when I discovered how floppy Honorine’s resin body was today, I decided to experiment. I enlarged the neck hole in Honorine’s head and popped her on the 11cm Obitsu body. She now has much more articulation than she ever did on her resin body, as the 11cm Obitsu has ball-jointed neck, shoulders, elbows, wrists, torso, hips, knees, and ankles. It’s even got double-jointed knees, a tripartite torso, and an amazingly tight set of joints. Anyway, she’s now nearly a head shorter than the other inhabitants of House Rainbow Barf, but I’m okay with that.  Pics below. Continue reading Honorine’s body upgrade

Paper dolls from VTDL part II — late Sixties and early Seventies styles!

Paper dolls from VTDL part II — late Sixties and early Seventies styles! published on 1 Comment on Paper dolls from VTDL part II — late Sixties and early Seventies styles!

Mary again brought more paper dolls to VTDL last month, and I only got around to processing the pics today. Below…more fashions clearly designed by people who were having fun exaggerating the traits of current trends. Continue reading Paper dolls from VTDL part II — late Sixties and early Seventies styles!

1:9 scale Missy done except for clothes!

1:9 scale Missy done except for clothes! published on No Comments on 1:9 scale Missy done except for clothes!

I finalized 1:9 scale Missy’s hair and faceup over the past few days. More detailed pics later, including shots with 1:9 scale Bill, when it’s not so late.Continue reading 1:9 scale Missy done except for clothes!

Stream of consciousness pea soup

Stream of consciousness pea soup published on No Comments on Stream of consciousness pea soup

1 lb dry green split peas
1 lb butternut squash, diced
1 russet potato, diced
1 large red onion, diced
3 cubes Edward & Sons LOW SODIUM Veggie Cubes
1 pkg apple and turkey sausage patties, diced
7 c water
salt
pepper
freeze dried diced garlic
thyme
cumin
chili powder
Prepare ingredients. Put them all in slow cooker. Season to taste. I used, in descending order of amount, garlic, cumin, thyme, salt, pepper, chili powder. Cook for 7 hours on high until peas have disintegrated, stirring regularly to distribute spices.

1:9 scale Missy gets improved hair

1:9 scale Missy gets improved hair published on No Comments on 1:9 scale Missy gets improved hair

I originally planned to make Shalka Doctor next in 1:9 scale, but I just felt so sorry for Missy with her shitty hair that I turned my attention to her next. Continue reading 1:9 scale Missy gets improved hair

Primary Sidebar